Belkin Surge Protector Both Lights On
Belkin Power Strip Surge Protector – 12 AC Multiple Outlets
Introduction
The Belkin 12-Outlet Surge Protector with Phone/Coax Protection, eight ft. Cord, BE112230-08 safeguards your electronic devices from power surges and spikes. It has 6 regular outlets and six BlockSpace™ outlets that tin accommodate large power adapters. Each of the 12 outlets has a sliding safety comprehend to keep out dust and dirt. It powers everything on your desk with a unmarried solid surge-protected extension cord. This reputable power cord proposes 12 Ac outlets with surge protector for charging yous laptop, phone, computer, camera and more.
The surge protector's coaxial protection safeguards cablevision and satellite connexion for clear picture and sound. Its phone line protection as well ensures open and continuous connectivity. It has 1 charging station for a ataxia-free desk. Information technology features a fax protection or a ane-in-2-out RJ11 telephone to brand sure the open and continuous phone line connections.
It is harm-resistant which protects the houses from impact, rust and fire. Also, its cord management lifts and locks to proceed cables groovy and tangle-free. The electrical strip has a 3,940-Joule energy rating which gives a reliable power extension cord to protect broadband modems, domicile theater systems or printers. It protects your electronics from short circuit, lightning strikes, fluctuations or overload. The widely spaced outlets give ample expanse to fit charger bricks and big plugs. Its slender design makes information technology suitable for workstations, game rooms and home office.
Product Features
| Specifications | Details |
| SKU | BE112230-08 (US) |
| Cord length | viii ft / two.4 m |
| Plug manner | Right angle |
| AC cord wire gauge | fourteen AWG |
| Number of outlets | 12 |
| Number of telephone connections | One input, ii output |
| Number of coaxial connections | I input, 1 output |
| Maximum free energy dissipation | 3,490 Joules |
| Maximum spike current | 75,000 amperes |
| Overcurrent protection | Aye |
| Telephone line protection | Yes |
| Coaxial line protection | Yes |
| Clamping voltage | UL 1449 500V |
| Response time | Less than 1 nanosecond |
| AC rating | 120V / 15A / 1,800W at 60 Hz |
| EMI / RFI noise filtration | 150 kHz ~ 100 MHz upwardly to 75 dB reduction |
| Status lights | · Protected (greenish) · Non Grounded (red) |
| Product warranty | Limited lifetime |
| Connected Equipment Warranty (CEW) | Upwards to $300,000 |
| Cable management | Yep |
| Wall-mountable | Yes |
| Power switch | Yep |
Package Inclusions
- Belkin BE112230-08
- Detachable cord management clip
HOW TO INSTALL
Open the fittings of the old switch and drill some holes in the wall. To install the plug, use a switchboard. Attach the cord with the wall with the help of screws.
HOW TO Utilize
Connect your phone, fax, modem, or network line from your wall outlet to the Surge Protector's Input jack. Connect an RJ11 or RJ45 phone cord to the Surge Protector's Output port, and the other end of the wire to the telephone, fax, modem, or network connector of the device you want to protect.
Frequently Asked Questions
- What does my surge protector's lite mean?
When both lights are on, you can be sure the surge protector is working properly. The presence of a surge light indicates that the surge protector is operational and set to provide protection. If this light goes out, y'all've had a surge, and the surge protector is no longer protecting you lot. - What does it imply if the light on my surge protector blinks?
If your surge protector'south blinking/flickering light is red or orange, it'south well-nigh likely a power light that signals whether the surge protector has been turned on or off. The neon bulbs in the red or orange low-cal will fade over time. They volition blink and flicker every bit a result of this. - What is the procedure for resetting my Belkin surge protector?
There isn't a reset push button. When the power switch is turned on, the Protected light indicator on the Belkin surge protector should also be on. If this light goes out at any point, information technology implies your Surge Protector has been sacrificed to safeguard your equipment and needs to be replaced. - On a surge protector, what does "non grounded" hateful?
The Not Grounded or Non Earthed light means your surge protector isn't grounded properly. If this light is on, you may have a ground-wiring issue and should have an electrician audit and footing the utlet properly. - Is surge protection required for telephone chargers?
Surge protectors should be used to safeguard desktop computers, laptops, televisions, gaming systems, and charging phones from harm during a tempest. A power fasten or surge can damage these devices or perhaps wipe out all of your data.
Source: https://manuals.plus/belkin/belkin-power-strip-surge-protector-12-ac-multiple-outlets-complete-features-user-instruction
0 Response to "Belkin Surge Protector Both Lights On"
Post a Comment